ICP Networks

HPE JG784A#ACC

New & Used HPE JG784A#ACC

HPE JG784A#ACC from ICP Networks

ICP Networks buy and sell HPE JG784A#ACC, and the large inventory of stock which we hold at our state of the art headquarters often allows us to offer same day shipping throughout the UK, with next day service across Europe and around the world on the parts you require.

Flexible procurement means flexible supply, and we can meet the demand for HPE JG784A#ACC whether you’re looking for a single item or an integrated system.

Please request a quote - We're ready to help

New And Used HPE JG784A#ACC

FlexFabric 12500

HPE FlexFabric 12518E AC Manageable Switch Chassis - 18 Expansion Slot - Modular - 2 Layer Supported - 38U High - Rack-mountable - 1 Year Limited Warranty

If for any reason you are unable to locate the HPE JG784A#ACC, or anything else you are looking for, please contact one of our team on +44 1625 468 450.

ICP Networks stocks a wide range of new / used HPE JG784A#ACC, as well as the other JG784A#ACC Routers, Switches and IP Phones which will allow a business of any size to put together a state of the art communications network specifically tailored to meet its needs, both now and in the future.

We also buy back excess and unwanted IT and networking equipment which has a resale value, allowing our customers to realise the cash value of unwanted technology assets, or reduce the cost of an upgrade or installation. Call us on +44 1625 468 450 and our customer care team will take the time to set out all the options ICP Networks offers for building a system to exactly meet your needs.

 

HPE JG784A#ACC Specifications

Manufacturer:
Hewlett Packard Enterprise
Manufacturer Part Number:
JG784A#ACC
Brand Name:
HPE
Product Line:
FlexFabric
Product Series:
12500
Product Model:
12518E AC
Product Name:
FlexFabric 12518E AC Switch Chassis
Packaged Quantity:
1
Product Type:
Switch Chassis
Modular:
Yes
Port/Expansion Slot Details:
18 x Expansion Slot
Number of Total Expansion Slots:
18
Expansion Slot Type:
Switch Fabric
~:
Management Module
Layer Supported:
2
Manageable:
Yes
Power Source:
Power Supply
Redundant Power Supply Supported:
Yes
Compatible Rack Unit:
38U
Form Factor:
Rack-mountable
Height:
442 mm
Width:
442 mm
Depth:
739.9 mm
Weight (Approximate):
160 kg
Environmentally Friendly:
Yes
Environmental Certification:
REACH

 

Why Choose HPE JG784A#ACC?

FlexFabric 12500 - JG784A#ACC

The HPE 12500 Switch Series is a family of powerful, next generation routing switches with outstanding capacity and leading scalability. Designed for high performance with non-blocking and distributed Clos architecture, they deliver up to 24.3 Tbps switching capacity and 10.8 Bpps throughput with up to 400 Gbps per line card slot.

Their energy efficient features are ideal for large-scale data center consolidation.

Features

Data Center Optimized

The HPE 12500 Switch Series provides up to 24.3 Tbps switching capacity and 10.8 Bpps throughput with up to 400 Gbps per line card slot.

Multi-tenant Device Context (MDC) is an innovative Data Center virtualization solution that enables multi-tenancy, giving you the ability to virtualize a physical switch into multiple topical devices, with each logical switch having its own tenants.

The Hewlett Packard Enterprise (HPE) Ethernet Virtual Interconnect (EVI) is an HPE Virtual Application Network innovation that provides a Layer 2 extension across the Data Center to simplify the interconnectivity of geographically dispersed Data Centers.

The Data Center Bridging (DCB) protocols provide support for IEEE 802.1Qaz Data Center Bridging Exchange (DCBX), Enhanced Transmission Selection (ETS), and IEEE 802.1Qbb Priority Flow Control (PFC) for converged fabrics.

High-Performance Networking Density and Connectivity

The HPE 12500 Switch Series has high-performance design with non-blocking and distributed Clos architecture.

This Switch Series offers high-density 1/10/40/100GbE interface connectivity with up to 18 interface module slots to scale to 865 1/10GbE or 288 40GbE or 72 100GbE ports.

Ultrafast protocol convergence enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF.

The IPv6 host enables switches to be managed and deployed at the IPv6 network’s edge, while dual-stack configuration transitions from IPv4 to IPv6, supporting connectivity in both protocols.

Enterprise Resiliency and High Availability

The HPE 12500 Switch Series supports redundant fabric for optimum network performance and availability while simplifying network operations.

These switches offer full hardware redundancy for each component including power supplies, fan trays, supervisor modules, and fabric modules to enable the highest level of availability.

Intelligent Resilient Fabric (IRF) creates virtual resilient switching fabrics, where two or more switches perform a single L2 switch and L3 router that can be attached using standard LACP for automatic load balancing and high availability.

Software-defined Networking (SDN) support helps you unleash new levels of automation and efficiency in Data Center networks.

The OpenFlow 1.3 specifications support SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths.

Higher Levels of Management

The HPE 12500 Switch Series has sFlow which provides scalable, ASIC-based network monitoring and accounting which allows operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time monitoring.

IEEE 802.1AB LLDP discovery advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications.

If for any reason you are unable to locate the HPE JG784A#ACC, or anything else you are looking for, please contact one of our team on +44 1625 468 450.

 

Why Choose ICP Networks ?

Trust:

Put simply, you should choose ICP Networks to provide your HPE networking solutions because you can trust us.

Recognized Experience:

You can take a look at the many accreditations and awards we've received, you can read the glowing comments of the many people we've done business with over more than a decade and, best of all, you can get in touch and find out exactly what were able to do for you. From a single piece of equipment to a complex and multifaceted system, no matter what your HPE needs are, we`ll be able to meet them.

Order before 4pm and we guarantee next day delivery via one of the army of couriers we utilise. Whether the item you purchase is brand new, end of sale, pre-owned or refurbished, it comes with our guarantee of excellence, and a promise that the recycling of IT equipment doesn't represent any drop off in quality.

Circular Economy:

On the contrary, our commitment to Green IT - manifested in the state of the art headquarters in which we are based - ensures we always go the extra mile to deliver exactly what our clients need at a price which represents the best possible value. By choosing ICP Networks a business or other organisation can access hardware such as HPE routers and gateways which might otherwise have been beyond their reach.

The fact that HPE are constantly innovating and trying to keep pace with the shifting business environment means that customers who choose ICP Networks to meet their needs can do the same, equipping themselves to handle the challenges of tomorrow whilst exploiting the opportunities of today. If you've got any questions then please bring them to a member of our customer care team, and we'll do our best to furnish the answers.

If for any reason you are unable to locate the type of HPE networking hardware, or anything else you are looking for, please contact one of our team on +44 1625 468 450.